SOVLED! “IRQL_NOT_LESS_OR_EQUAL” Windows 11 What You Should Do

by

Corruption in system files is responsible for quite a few Windows errors and “IRQL_NOT_LESS_OR_EQUAL” Windows 11 is one of them. The best solution in most of the cases is to perform SFC and DISM scans. Also, it’s wise to run Check Disk, make use of Windows Memory Diagnostic, update drivers and reset PC. Continue reading to be able to take care of the BSOD error on your own. 

Questions And Answers

How do I use Startup Repair on Windows 11?

  • Step 1: Turn off your computer, wait for a minute and turn on your computer. As Windows loads up, turn off your computer. Repeat the process until you get to Windows Recovery Environment.
  • Step 2: Go to Troubleshoot > Advanced options > Startup Repair
  • Step 3: Pick your account, enter its password and click Continue.

What are the differences between Windows Reset and System Restore?

Windows Reset reverts your PC to its default configuration and clears all the changes you have made. On the other hand, System Restore allows you to restore your PC to a point in the past.

What’s the fastest way to download Windows 11?

The fastest way to install Windows 11 is via Windows 11 Installation Assistant available on Windows 11 download page.

Causes Of The Error

All in all, BSOD is a serious error but it’s possible to learn what might have gone wrong by reading the error message. About “IRQL_NOT_LESS_OR_EQUAL” Windows 11, you should keep these suspects in mind:

  • Corruption
  • Memory 
  • Drivers

Courses Of Action: Summary

Perform SFC And DISM Scans

Once it comes to fixing corrupted system files, nothing could match SFC And DISM scans. If you have a hard time using your Windows 11 computer due to BSOD, perform SFC And DISM scans. 

  • Step 1: Go to Search bar, type cmd and hit Run as administrator to open Command Prompt with administrative privileges. 
  • Step 2: Type sfc /scannow then press enter to perform SFC scan. 
  • Step 3: When the SFC scan completes, proceed to type the following commands and press Enter after you finish each to perform the DISM scan:
    • DISM /Online /Cleanup-Image /ScanHealth
    • DISM /Online /Cleanup-Image /CheckHealth
    • DISM /Online /Cleanup-Image /RestoreHealth
  • Step 4: Type exit then press Enter to close Command Prompt.
  • Step 5: Restart your computer. 

Run Check Disk

  • Step 1: Go to Search bar, type cmd and hit Run as administrator to open Command Prompt with administrative privileges. 
  • Step 2: Type chkdsk C: /f then press Enter. Feel free to replace C: with other drive letters to check out the drives on your PC. 
  • Step 3: Exit Command Prompt, restart your computer and see how things turn out. 

Use Windows Memory Diagnostics 

  • Step 1: Go to Search bar, type Windows Memory Diagnostics and press Enter.
  • Step 2: Hit Restart now and check for problems.
  • Step 3: Allow the process to go all the way, read the result and take action accordingly.

Update Drivers 

  • Step 1: Go to Search bar, type Device Manager and press Enter. 
  • Step 2: Right-click each of the devices, pick Update driver and hit Search automatically for updated driver software. 
  • Step 3: The moment the update wraps up, restart your computer. 
  • Step 4: When the screen comes back on, determine whether the issue persists. 

Note: You recently updated some of the drivers on your PC? In that case, it’s a good idea to rollback those drivers at the earliest opportunity. 

  • Step 1: Go to Search bar, type Device Manager and press Enter. 
  • Step 2: Right-click each of the devices with recently updated drivers then pick Properties. 
  • Step 3: Go to the Driver tab, hit Roll Back Driver and follow onscreen instructions.

Reset PC

  • Step 1: Press Windows + I to open Settings, select Windows Update and choose Advanced options. 
  • Step 2: Click Recovery then pick Reset this PC.
  • Step 3: Select Keep my files and choose Cloud download.
  • Step 4: Follow the on-screen instructions. 

Leave a Comment